WHY US?
   
 

"Why Do We Build The Best Pool"

Below Are The Engineering Secrets That Make Us The Finest Quality Pool Builder in All of Southern California

Here's Just A Few Reasons
 

  • We Use 4000 PSI Gunite:

    • Pool shell is more resistant to hydraulic pressures and structural stress factors - Increases the structural
    • integrity if the Pool Shell, especially during ground movement and earthquakes. Code: Not Required

  • Our Pool Is Tied at 6" on Center "OC"

    • Increases structural integrity of the pool shell, minimizing the possibility of pool shell cracking, separating and leaking water. Code: Not Required

  • Engineering Pool or Caissons
    • Keeps the pool anchored in the ground reducing the possibility of the pool sliding down a slope, popping out of the ground or setting out of level. Code: Not Required

  • Solid Steel Cage Around Skimmer

    • Completely eliminate the possibility of the skimmer moving, separating from the pool and leaking out water -saving thousands of dollars in damage and repair bills. Code: 3# Bars of steel

  • We Waterproof Gunite Under The Tile Brown Coat
    • Eliminates the possibility of the water leaking out of the pool due to cracks in tile brown coat. Code: Not Required
  • We Waterproof Gunite on Raised Bond Beams
    • Eliminates water in raised planters from leaking into the pool through the tile grout joints, which eliminates the ugly looking white calcium buildup on the tiles and grout joints. Code: Not Required
  • We Use Acrylic Addmix In Our Thinset
    • This bonds the tile to the pool much better, doubling the years your tile bond to the pool. Code: Not Required

  • We Use Acrylic And Anti Hydrate Addmix in Tile Grout

    • Increases the bond, extra water proof protection, reduces grout cracking, grout stays cleaner and is also easier to clean if necessary. Code: Not Required

  • All Light Niches, Return Lines And Spa Jets Are Waterproofed Prior to Plaster

    • Reduces the possibility of water leaking out of the pool or spa. Makes for nicer cleaner installation of hardware. Code: Not Required

  • All Pool Plumbing Is Coated with Primer Prior To Gluing

    • Primer completely cleans and softens the glue fittings for stronger adhesions. Reducing the possibility of Plumbing Leaks. Code: Not Required

  • We Pressure Test Our Plumbing To 50 PSI

    • This Additional Pressure insures that all glue fittings are completely glued and connected. This gives your plumbing added protections that it will not come apart even under extreme conditions. Code: 35 PSI

 

 L.A. Office  | 26152 Kenrose Circle | Calabasas, CA 91302

 

866-44-POOLS | info@pools.LA